register control

英 [ˈredʒɪstə(r) kənˈtrəʊl] 美 [ˈredʒɪstər kənˈtroʊl]

网络  寄存器控制; 注册控件; 控件管理

计算机



双语例句

  1. Name& To register and control the active state of the user exit.
    名称&注册和控制用户出口的活动状态。
  2. You must register the control before you use it.
    您必须在使用该控件之前对其进行注册。
  3. This method has been overridden to register the validation control on the page.
    已重写此方法,以在页面上注册验证控件。
  4. Cannot register control callback handler for service { 0}.
    无法注册服务{0}的控件回调处理程序。
  5. To improve data transmission rate of JTAG interface, instruction register and related control logic are redesigned.
    为了提高JTAG接口的数据传输效率,指令寄存器和相关控制逻辑被重新设计。
  6. The register control inputs AO and12/ 8 control conversion length and data format.
    记数器控制输入AO,12/8控制转换长度和数据格式。
  7. Functions: two stage shut-off, flow-rate control in conjunction with any electronic register with digital flow control.
    功能:双开关,流量控制与任何数字流量控制的电子登记结合。
  8. Programming Method of Applying Shift Register for Switching Signals Control System
    应用移位寄存器对开关量控制的编程方法
  9. The Usage of Shift Register in Sequence Control
    移位寄存器在顺序控制中的应用
  10. Presently, the register device of domestic sheet-fed offset press could adjust two direction of side lay and vertical register, however could not adjust diagonal register, and lack automatic register control system, and require developing.
    目前国内的单张纸胶印机的套准机构一般只有周向和轴向两个方向,对角线方向的套准机构还处于空白阶段,而且尚缺乏成熟的自动套准控制系统,亟待研制开发。
  11. It comprises of four basic unit: input delay, filter, register bank, and control unit.
    这种结构由四部分构成:输入延迟单元、寄存器单元、滤波器单元和控制单元。
  12. Taking the characteristics of the three registers into account, we use the data register of the parallel interface to transmit data, the state register to receive data and synchronize clock and the control register to control the transceiver's PTT in this paper.
    针对这3个寄存器特点,采用计算机并行接口数据寄存器发送数据,状态寄存器接收数据和同步时钟,控制寄存器控制电台PTT。
  13. The work principle of every part of microprocessor is analyzed, and a strong emphasis is laid on the design of program counter, instructions decipher, execute unit, register group and control center.
    论文分析了处理器内部部件的工作原理,详细阐述了微处理器的取指单元、译码单元、执行单元、寄存器组和控制核心的设计。
  14. The structure and operating principle of series of traveling-wave type, cylindrical bending vibration type, new stepping type and multi-degree type ultrasonic motors have been described. Their application foreground in precise register control system, car electric appliances and aerospace field etc.
    描述了系列环形行波型、柱体弯曲振动型、新型步进型、多自由度等超声波电机的结构与工作原理,阐述了其在精密定位控制系统、汽车电器、航空航天等领域的应用前景。
  15. Diagonal Register and Automatic Control System Based on Image Processing for the Sheet-fed Offset Press
    基于图像处理的单张纸胶印机对角线套准及自动控制系统
  16. Shaftless driving technology will be the developing direction of the color register control in the future.
    无轴传动技术是套色控制未来发展的方向。
  17. Automatic control has been widely used in industrial control. This paper introduces a simple and easy method of SR FP_PLC the left register instructions from the control system automatic trip control design.
    自动往返控制在工业控制中被广泛应用,本文介绍应用松下PLC的SR左移寄存器指令设计自动往返控制系统的一种简单易行的方法。
  18. Chlor Register Control System for Concave Format Combining Printing Machine
    组合式凹版印刷机彩色套准控制系统
  19. This topic is carries on the optimized design to the existing offset press Automatic Register Control System, enhances to the low color difference signal recognition and the judgment, thus enhances the system the sensitivity and the precision.
    本课题是对现有的彩色凹印机自动套准系统进行优化设计,提高对低色差信号的识别和判断,从而提高系统的灵敏度和精确度。
  20. Application Analysis of Auto Disturbance Rejection Controller Based on Model for Register Control of Printers
    基于模型的自抗扰控制器在印刷机套色控制中的应用分析
  21. Using shifting register to control single sequence is very easy, but difficult to other control methods.
    用移位寄存器对单一序列易于控制,对其它的控制较为困难。
  22. We put emphasis upon systemic hardware design, discuss the sequence control of CPLD, Register control of image sensor, and hardware exploiture, software realization, empirical analysis of DSPs, etc.
    并着重研究了系统的硬件设计,讨论了CPLD的时序控制、图像传感器的寄存器控制以及DSP芯片的硬件开发、软件实现、实验分析等等。
  23. The synchronous data transmission system terminal of a transceiver always transmits bit by bit transparently when receiving and transmitting data. A computer parallel interface includes three ports respectively for a data register, a state register and a control register.
    电台同步数据传输系统终端在收发数据时一般为透明逐bit传输,计算机并行接口包括数据寄存器、状态寄存器和控制寄存器3个端口。
  24. Key technology such as the bound data source, automatic register control, multimedia precise control, use SQL to access the database through ODBC services structure, custom script definition and explanation detailed realization method is given.
    对自动绑定数据源、自动注册控件、多媒体精确控制、通过ODBC服务结构用SQL访问数据库、自定义脚本定义和解释等关键技术给出了详细的实现方法。
  25. At this moment, the industry used high-precision automatic register control systems are mostly imported from abroad, the prices are more expensive, the control system can only meet the domestic requirements.
    目前,工业上常用的高精度自动套准控制系统大都是从国外引进的,价格较为昂贵,国内的控制系统只能满足中低档要求。
  26. The MAC layer controller hardware modules are designed using Verilog hardware description language, including the transmission of the engines, receiving engines, buffer module, register module, control module and the WEP module.
    采用Verilog硬件描述语言实现了MAC层控制器的硬件部分,包括发送引擎、接收引擎、缓冲区模块、寄存器模块、控制模块等模块。
  27. Tension control is the core for the whole machine, only the constant tension can make the color register at accurate control and reduce the waste, so we should have the perfect tension control system in order to ensure the product quality and efficiency.
    张力的控制系统是整机控制的核心,只要张力控制稳定,凹印机的套色精度就能保证,使废品率大大减少。因此,要想确保印品质量和效率必须配备功能完备的张力控制系统。
  28. Main controller use two shift register to control LED lights, digital tubes, buzzer realize local display and alarm.
    主控制器通过两个移位寄存器来控制LED灯、数码管、蜂鸣器实现本地显示与报警。
  29. Automatic register control is the core of the printing pressing control system. It is the most important factor that can decide the quality of the printing products.
    自动套准控制是整个印刷机控制系统的核心,是决定印刷制品质量的重要因素。
  30. The software design including: CMOS image sensors register configuration, image decoder, address decoder, timing logic control and register control.
    软件设计包括:CMOS图像传感器寄存器配置、图像解码器、地址译码器、时序逻辑控制及寄存器控制。